Step 1 – Prime the tip
Before applying, you must soak the tip with liquid.
Press the tip firmly on a hard surface several times until the liquid flows properly into the tip.
You’ll know it’s ready when the tip changes color from yellow to dark brown and looks fully soaked.
This step is essential for the pen to work correctly.
Step 2 – Apply like a marker
Use the pen exactly like a marker.
Gently “color” over the scratch, following the line of the scratch.
Keep applying until the scratch visually disappears.
Step 3 – Wipe immediately
Right after applying, wipe the area with a clean cloth to remove excess product and smooth the surface.
Do not wait. Wiping immediately is key for a clean finish.
Step 4 – Let it dry
Let the area dry for 2 to 3 hours.
Once cured, the surface will look clean, smooth, and refreshed.
Your scratch is gone, and your car looks clean again.
• One pen can treat up to 30 meters of scratches.
• The liquid stays fresh as long as you keep the cap tightly closed after each use.
• Applied too much and it dried? You can gently rub the area with a small amount of acetone to remove excess product.
• Need replacement tips? Extra tip packs are available here.